Suitable for gas, oil and solid fuel appliances with temperatures up to 600°C.
EuroSW1 pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
EuroSW1 pipe should NOT be used to pass through ceilings or combustible walls.

CONSTRUCTION
EuroSW1 is a single skin connecting flue system manufactured in zero carbon steel.
Suitable for gas, oil and solid fuel appliances with temperatures up to 600°C.

INSTALLATION
You should not install a piece of EuroSW1 150mm within 450mm from combustible material, e.g. wood, plaster boards, etc.
When installing make sure EuroSW1 is installed the correct way up - the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of the EuroSW1.
EuroSW1 is a friction fit joint so dose not require sealing of the joints, For extra security if desired each joint could be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.
EuroSW1 has been designed to be cut, but care must be taken to cover any exposed steel with high tempteture paint as this will rust over time.
When installing appropriate PPE should be worn at all times.

MAINTENANCE
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
You can acheive this by installing a EuroSW1 with an access doors at changes of direction.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

Search

Categories

Brands

Colour

Fuel Type

DEFRA Approved

Clearance

Price

Efficiency

Rated Heat Output

31-150-015 - 250mm Pipe with Door - Ø 150mm